Joyetech Ultex T80 Starter Kit Preview

156

Joyetech Ultex T80 Starter Kit Preview

The Joyetech Ultex T80 Starter Kit is the newest pen style kit device from popular vape manufacturer Joyetech.  It’s a single 18650 regulated stick style mod with a DTL Low watt Cubis Max tank. This is the Joyetech version of a stick kit like the Uwell Nunchaku kit which is really the only other competitor, so nice to see more mods like this.

It’s available in 5 colors; Matte Black, Sky Blue, SS, Gold, and Dazzling (Rainbow). It’s too new to find online but should be priced in the 30-60 dollar range and released late October.

Joyetech Ultex T80 Starter Kit
Joyetech Ultex T80 Starter Kit

Joyetech Ultex T80 Mod Specs:

  • Size: 28.0×138.5mm
  • Weight: 163.0g (no cell)
  • Colors: Matte Black, Silver, Gold, Sky Blue, Dazzling
  • Battery using: single high rate 18650 cell (CDR ≥ 25A)
Joyetech Ultex T80 Starter Kit
Joyetech Ultex T80 Starter Kit
  • E-liquid capacity: 5.0ml
  • Heater: Joyetech NCFilm™ heater (Kanthal 0.25ohm)
  • Screen: 0.49 inch OLED display
  • Output: 1-80W
  • Modes: POWER/BYPASS/TEMP(NI/TI/SS)/TCR
  • Resistance range: 0.05-1.5ohm for TEMP/TCR mode
  • 0.05-3.5ohm for POWER mode

Cubis Max Tank Specs:

  • Size: 28.0×50.0mm
  • Weight: 71.0g
  • Colors: Matte Black, Silver, Gold, Sky Blue, Dazzling
  • E-liquid capacity: 5.0ml
  • Heater: Joyetech NCFilmTM heater (Kanthal 0.25ohm)
  • 510 drip tip

Joyetech Ultex T80 Starter Kit Packing List

Joyetech Ultex T80 Starter Kit
Joyetech Ultex T80 Starter Kit
  • ULTEX T80 (no cell)
  • CUBIS Max atomizer(including 1 * NCFilm™ heater)
  • QC USB cable
  • Two Manuals
  • Warranty card
  • Two Warning cards
  • Spare parts

Joyetech Ultex T80 Starter Kit Preview

The Joyetech Ultex T80 with Cubis Max Tank Kit, is a new starter stick style device from Joyetech. The main draw of this kit is that it’s a rare fully adjustable single 18650 mod. The only other one’s I can think of in recent years are the Uwell Nunchaku and Ehpro 101 and while the Nunchaku is great, the Ehpro 101 has all sorts of issues so as of now there is only one good mod like this on the market so if the Ultex T80 does well it fills a much needed void for this style of product.

Joyetech Ultex T80 Starter Kit
Joyetech Ultex T80 Starter Kit

The mod itself is solid and feels really well built. The Paint is excellent as well. I have the sky blue one and it’s a nice matte blue color. The mod uses a 5 click to turn on and off. The Mod is fully adjustable up to 80 watts and has all the typical modes you expect from a Joyetech mod including Wattage, Bypass, TC for Ni200, Ti, and SS and 3 TCR memory spots.

Joyetech Ultex T80 Starter Kit Preview Continued

It’s your typical Joyetech menu with 3 clicks to enter the menu then cycle the mode you want. It has a small black and white screen on the front that looks decent. Similar to the Nunchaku so hard to complain. The stick is just really nice overall and beautiful and if it can perform which I’ll be testing for in my review, it could be a great choice for a regulated stick mod.

It comes with the Cubis Max tank which is a 28mm at its widest point low watt DTL tank best used in the 40 or so watt range so very similar to the Uwell Nunchaku kit. The tank comes with a standard 5ml capacity which is great. The AFC is smooth and easy to adjust and on a stopper.

Joyetech Ultex T80 Starter Kit
Joyetech Ultex T80 Starter Kit

They use 2 large top airflow holes equally spaced apart. They also include a black Delrin standard 510 drip tip and it has the typical slide back top fill as well. Where the tank is unique is the coil design. They use their new NC film Heater coils which are kanthal .25 ohm coils best used at 40 watts give or take. It’s not your typical coil head to install, however. It’s a flat notch like a coil with no cotton.

Joyetech Ultex T80 Starter Kit

More On The Joyetech Ultex T80 Starter Kit 

What you have to do is unscrew the base and pull out the deck like you would on a Boreas RTA or Aromatizer Supreme RTA and in the base you have a ceramic plate with an indent for cotton. It takes a small cotton square you have to place in the indent. The coil is held in place by 2 Phillips head screws on the tank. So unlike many tanks, you will need a screwdriver to replace the coils and it’s a little more difficult than simply screwing in a coil head which may be a turnoff to some.

It comes with 2 coils,  but both are the same and the only coil made for the tank. They are .25 ohm Kanthal “NC film” coils that can also be wicked rated at around 40 watts. They claim you can get 72k puffs per coil which I highly doubt but will be testing these claims. That including cleaning and rewicking though. Even it if meets 10% of that claim that would be pretty good though. They recommend using  60% VG juices.

Joyetech Ultex T80 Starter Kit Video 

Conclude

Overall the Joyetech Ultex T80 Starter Kit has all the makings to fill the need for this style device as long as the coils and mod can perform as they should.

Anthony Vapes

I started vaping in late 2011 to quit chewing tobacco. over the past few years i got a lot more into the hobby side and buying and collecting a lot of gear. Fed up with the lack of good fair reviews i decided to start doing reviews late 2016 and haven’t looked back. I enjoy providing people with technical reviews that are fair and unbiased and from a place of knowledge to help them spend their money wisely.